Physical Properties and Chemical Composition of the Rice Husk and Dust
Tatyana Germanovna Korotkova, Svetlana Jurevna Ksandopulo, Aleksandr Pavlovich Donenko, Svyatoslav Andreevich Bushumov and Aleksandra Sergeevna Danilchenko
Kuban State Technological University, Russian Federation, 350072, Krasnodar, Moskovskaya Street, 2.
Article Publishing HistoryThe paper deals with the physical properties and chemical composition of rice husk and dust, which are the waste of the Regulus raw rice growing in the Krasnodar Region of the Russian Federation. Rice dust is formed as a result of the discharge upon the receipt of raw rice from vehicles, removal of impurities, sorting by size, during separation of membranes, crushing, grinding, polishing, moving grain along the elevators and conveyors, i.e. during all technological operations production of rice groats. In order to remove dust, the group cyclone and the bag filter-cyclone are installed in the pneumatic conveying systems and suction plants of "Southern Rice Company", LLC. The paper shows the chemical composition of samples of husk, dust retained by the group cyclone, and dust retained by the bag filter-cyclone. Rice husk contains a significant amount of silicon dioxide – 14.8%. The dust collected from the group cyclone contains ferrum (109 mg/kg), plumbum (1.1 ± 0.4 mg/kg), and copper (1.2 ± 0.4 mg/kg). The bag filter-cyclone retains finer dust particles. The dust collected in the cyclone is of yellowish-pink color, and the dust, collected from a bag filter-cyclone, is gray. Fine dust, which has passed through the filter, is drier than the dust, segregated in a cyclone, so it is more explosive and easily ignited. Dust can cause the explosion. The dust properties give an indication of the degree of its danger and the ability to form explosive concentrations in air.
KEYWORDS:
rice husk, rice dust; group cyclone; bag filter-cyclone; physical properties; chemical composition
Download this article as:
Korotkova T. G, Ksandopulo S. J, Donenko A. P, Bushumov S. A, Danilchenko A. S. Physical Properties and Chemical Composition of the Rice Husk and Dust. Orient J Chem 2016;32(6).
Korotkova T. G, Ksandopulo S. J, Donenko A. P, Bushumov S. A, Danilchenko A. S. Physical Properties and Chemical Composition of the Rice Husk and Dust. Orient J Chem 2016;32(6). Available from: http://www.orientjchem.org/?p=26245
Introduction
Rice dust is formed during the processing of rice grain at a rice-processing plant as a result of the discharge upon the receipt of raw rice from vehicles, removal of impurities, sorting by size, during separation of membranes, crushing, grinding, polishing, moving grain along the elevators and conveyors, etc., i.e. during all technological operations of the rice groats production.
High dust concentration in the air is one of the main adverse factors, resulting in environmental pollution and occupational diseases. Prolonged breathing in the dusty air causes heavy damage to human health. Dust with a diameter greater than 10 microns causes irritation of the upper respiratory tract.
Grain dust is a respiratory sensitizer. This means that it can cause an allergic reaction in the respiratory system. After this reaction takes place, a further effect on the material, even in very small amounts, causes symptoms. The following are the health impairment manifestations: rhinitis (runny nose or nasal congestion); cough and shortness of breath; asthma (coughing, wheezing, and chest tightness); chronic bronchitis (cough and sputum); chronic obstructive pulmonary disease (COPD) (long-term illness which makes breathing difficult and includes chronic bronchitis, chronic asthma); extrinsic allergic alveolitis (fever, cough, shortness of breath, joint pain, and weight loss). Organic dust is accompanied by a toxic syndrome, for example, grain fever (sudden onset of “influenza” with fever, often associated with cough and chest discomfort) [1].
In order to determine the chemical composition of rice husk and dust, the authors selected the husk of the Regulus raw rice, which grows in the Krasnodar Region of the Russian Federation, and two dust grades, detained by a group cyclone and a bag filter-cyclone installed at the “Southern Rice Company”, LLC (Kholmsk Station, Krasnodar Region, Russia).
Related Work
It is shown in the paper [2] that the place of rice hulling (separation of fruit shells) is the most dangerous one. The dust content during hulling with the use of wooden mill is 22.44 mg/cu.m., iron – 25 mg/cu.m. All workers suffer lung diseases. Forced vital capacity (FVC) of all workers is less than 80%, while the normal value shall be more than 80%.
Waste in the form of fruit shells (husks, peeling, chaff) is significant. The volume of rice husk with hulling bran formed by rice grinding is 20-30% by grain weight. This annually renewable waste contains 28-30% of inorganic and 70-72% of organic compounds [3]. According to [4], the composition of the organic compounds includes C, H, O, N (Table 1). The inorganic components are represented mainly by silica. In general, the authors of [3] proposed to consider rice husk as silica. The chemical composition of rice husk ash is given in Table 2.
Table 1: The composition of the rice husk organic compounds
Content, % wt.
Table 2: The composition of the rice husk ash
Content, % wt.
Rice husk is used in agriculture and in various industries. Paper [5] provides the concept of resource-saving processing of rice husk and straw, which provides pre-extraction of SiO2, followed by delignification of desilicated raw materials. For this purpose, straw and rice husk were treated with 1 N sodium hydroxide solution at 90° C for 60 min. The proposed technology for oxidating-organosolv method of rice husk boiling allowed obtaining the high yield pulp 79.5 ± 1.0 from the rice husk. It was concluded that rice straw and husks are a promising raw material for the production of valuable products – silica and cellulose with a high product yield.
In [6], the physical properties and chemical composition of the refractory clay and clay mixed with rice husk (Table 3) are studied.
Table 3: Physical properties and chemical composition of clay and clay with rice husk
Physical properties
Sample
Shrinkage
Apparent porosity,
Bulk density, g/cu.cm
Thermal resistance, cycles
Fire resistance,
ºC
The control sample showed a weak thermal resistance of one cycle, while the sample with the addition of husk has a thermal resistance of 10 cycles at 1200 °C. The silica content is in the range 50-70%. It is proposed to use such materials as the lining of thermal furnaces, melting furnaces, for point metals with low melting point. Elevated levels of iron oxide indicate the suitability of the material for the production of ceramics.
According to the results of laboratory tests, the grain dust surface area was determined to be 0.6-0.9 sq.m./g [7], rice dust bulk density – 0.221 g/cu.cm, and the density of rice dust particles – 1.46 g/cu.cm [8].
The basic composition of the rice dust and the elemental composition of different portions of rice dust is presented in [9] (Tables 4 and 5). It was noted that silica, cellulose and lignin are the main components of the rice dust. The paper presents the scheme of production of particle boards based on a mixture of rice dust with the resin followed by compression. To achieve high board quality, the husk is pulverized.
Table 4: The elemental composition of different parts of the grain dust
Outer surface of
Inside the husk,
Inner surface of husk, % wt.
Table 5: The basic composition of grain dust
Aspiration dust of grain processing industry is a set of residues of vegetable origin containing polysaccharides and other organic substances easily hydrolysable using acid [10]. The composition of aspirating waste of white, gray and black dust is provided in Table 6. The aspirating dust-based suspension hydrolysis was performed in the presence of a sulfuric acid with the concentration intervals from 1.0% to 8.0% at 100 ± 0.1 °C.
Table 6: Composition of aspirating waste
Material
composition
Concentration of substances, %, in various dusts
white
gray
black
Fermentation was performed in the media derived from hydrolysates synthesized from the white, gray and black dust using acid solutions with the concentration of 1.0% to 5.0%. Based on the analysis of the changes in the concentration of yeast during fermentation of different kinds of dust hydrolysates, it was established that grain processing businesses solid waste can be used as a source of digestible carbohydrates for yeast fermentation. Easily digestible carbohydrates are obtained by acid hydrolysis of aspiration dust polysaccharides [10].
In this work, the number of components was determined by the approved (RF) methodologies PND F 16.1: 2: 2.2: 2.3.46-06; PND F 16.1: 2: 2.2: 3.65-10; GOST 5180-2015.
The PND F 16.1: 2: 2.2: 2.3.46-06 methodology is based on inversely-voltammetric method, which is based on the dependence of the current passing through the analyzer cell with the test solution, on the mass fraction of the element contained in the solution and functionally linked to the form and parameters of the polarizing voltage applied to the electrodes. This method is based on the ability of the element of interest to electrochemically accumulate on the surface and dissolve in the anode or cathode polarization at a certain potential, which is characteristic for each element. The peak height of the element recorded on voltammogram is proportional to the mass fraction of the element in the solution.
The method for the determination of silicon dioxide weight ratio (PND F 16.1: 2: 2.2: 3.65-10) is based on the fusion of the sample with soda; smelt leaching and transfer of the metal salts in chlorides by treatment with hydrochloric acid; separating of silica using gelatin; ashing of silicic acid to silicon dioxide, and its determining using gravimetrical method.
The humidity of rice husk and dust (GOST 5180-2015) was determined by drying to constant weight. The dust samples were collected by quartering. Drying was carried out to obtaining a difference of dust (husk) masses with a weighing bottle during two subsequent weighings of not more than 0.02 g.
“Southern Rice Company”, LLC (S.R.C.) produces the gourmet brown rice of Regulus domestic variety, the qualitative characteristics of which exceed the similar parameters of the best imported samples. The technological stages of the raw rice production and the characteristics of aspiration systems like air pollutants were considered in [11-12].
The following two types of dust collectors (cyclones) are installed in the working house of “Southern Rice Company”, LLC for cleaning of pollutant emissions. TSOL – for cleaning of dusty air coming from aspiration and pneumatic networks (sawdust, weeds, grain dust and other impurities) of particles larger than 126 microns, and U21-BBC-450 – the battery cyclone plant (Figure 1) with a 450 mm cyclone diameter. U21-BBC was made by category I of GOST 15150-69 (RF) in “U” climatic version (for the macroclimatic area with a temperate climate) releasing the purified air upward, and is designed to collect medium sized dust. The large grain dust collection efficiency is 95-98%. The battery cyclone plant consists of four cyclones of conical-cylindrical shape. The cylindrical part of the cyclone includes inner and outer cylinders. The outer cylinder at the top is cut along the spiral line; a pipe is welded to it. The inner cylinder is inserted into the outer one. Four cyclones are attached to the receiving hopper at the top. Dusty air is supplied in the cyclone through the inlet and its movement becomes a helical rotational one. By centrifugal force the dust particles press against the walls of the cyclone, lose speed and roll down into the collecting cone. With the help of the lock closures unit, the collected dust is discharged to the dust pipe, and through the exhaust pipes of cyclones and setup box purified air is discharged from the cyclones in the air duct. The air cleared of large and medium-sized particles enters the bag (B) filter-cyclone (C) BCIEU 24.0-37, which has a flat bottom and is provided with the impulse (I) blowing and electronic (E) control unit (U) with the filtration surface of 24 sq.m. and 37 bags. The dust is removed from the air during the air filtering through the fabric cross-linked as separate bags and embedded in a sealed filter case (Figure 2). The design of the bag filter represents a collapsible cabinet, divided into sections by vertical partitions. Each section has the cylindrically-shaped filter bags. The bags are stretched on a metal frame. The bags are periodically cleaned of dust deposited thereon as a result of their shaking through a special mechanism.
Figure 1: AS-7 Group cyclone U21-BBC-450 of “Southern Rice Company“, LLC.
Figure 2: Bag filter-cyclone BCIEU 24.0-37 of “Southern Rice Company“, LLC.
