RBT IV

The RBT IV consists of an Alco-Sensor® IV and a programmed Microprocessor Printer which prompts the step-by-step test sequence, prints a hard copy of the result and stores test information to memory.

Send Quote for RBT IV

No forms defined Quote sent successfully! Request a Quote

The standard RBT IV will request the entry of subject and/or operator information prior to performing a test and then will produce a hard copy result documenting the collected data along with pertinent test result information. Specific test protocols are available, off the shelf, including DOT, NRC and Law Enforcement protocols. Custom protocols in a variety of languages can also be designed upon request with three or four digit results.

Analytical System	Utilizes an Intoximeters electrochemical fuel cell sensor which generates an electrical response that is proportional to the Breath Alcohol Concentration in the provided, fixed volume sample. The fuel cell sensor is highly selective for alcohol. It does not respond to acetone or other substances found in the human breath after a fifteen minute deprivation period.
Measurement Types	Direct Test / Manual Sample Direct Test / Automatic Sample
Measurement Range	.000 to .400 g/210L (custom ranges and units of measure are available)
Accuracy and Precision	Meets the NHTSA model specifications for Evidential Breath Test Devices
Environmental Limitations	Instrument is designed to be used and has a proven track record in almost any environment that an operator could expose breath alcohol testing instruments to. Instrument operates in a wide range of temperatures, ambient humidity, and atmospheric pressures.
Mouthpiece	Direct Sample – Intoximeters designed one-way mouthpiece provides both a means to turn the instrument on without damaging the on switch mechanism and provides a tested and proven mouthpiece that produces accurate and repeatable results with minimal backdraw.
Visual Output	Highly visible red, four character LED display on ASIV and backlit two line sixteen character LCD display on RBT printer
Audio Output	Audible tone to support visual messaging
Data Storage	900 tests (depending upon number of data fields collected)
Print Capable	The RBT IV has its own custom printer/microprocessor for printing and storing test data
Power Options	Disposable Batteries – Single 9V alkaline battery in ASIV Power for Printer – Rechargeable 12V DC battery for RBT (trickle charger included) Wall Current – Optional power adapter for stationary use (without 12V battery)
Case Construction	Instrument – Metal fiber impregnated, impact resistant ABS plastic to protect the instrument from rough handling and provide radio frequency shielding. Printer case is made of ABS plastic. Carrying case – Nylon, water resistant softcase is provided in standard package.
Physical	Instrument Dimensions – 5.5″ x 3.5″ x 1.5″ Instrument Weight (with batteries) – .69 lbs. Standard Carrying Case Dimensions – 16″ x 6″ x 14″ Standard Carrying Case Weight (loaded) – 7.25 lbs.
Approvals	NHTSA (US DOT) EBT, Inquire for list of approved US states or certifications in countries outside of the USA. CE Mark
Standard Package Includes	RBTIV Printer/Microprocessor Printed Manual 100 Mouthpieces
Instrument Options	IntoxNet Data Management System RBTIV Serial Adapter
Training	Intoximeters offers in person training and has a variety of training tools available to help a user cascade training to their own operators. Contact our training department for more information (see Training section of our website at www.intox.com/training).

Reviews

There are no reviews yet.

Be the first to review “RBT IV” Cancel reply

You must be logged in to post a review.

Impact Paper Roll 1-3/4″ Wd x 25′ Lg

Alco-Sensor® IV, RBT IV, EC/IR® Mouthpiece

12V Rechargeable RBT Printer Battery

RBT IV Charger Harness

12V RBT IV Power Adapter

RBTIV Pelican Case and Foam

Box of Evidence Tape (600/box)

12V RBT IV Battery Charger

Non DOT Forms for RBT IV, AMCC, EC/IR, AS IV @Work, or ASVXL

DOT Forms for RBT IV, AMCC, EC/IR, AS IV @Work, or ASVXL

Tamperproof Impact Paper Roll 1-3/4″ Wd x 38′ Lg

Alco-Sensor® IV RBT Soft-Sided Case Upgrade Kit

9V Alkaline Battery

Impact Paper Roll 1-3/4″ Wd x 100′ Lg

108 Liter Dry Gas Tank (.082) C

NRC Instructor Prep Training

The NRC Instructor Preparatory Training is focused on the needs of Breath Alcohol Technician Instructors, regulated by the Nuclear Regulatory Commission. The course covers Operator and Calibration Technician training, plus the following:

Review of Common Challenges in Breath Alcohol Testing
- Mouth Alcohol
NRC Instructor Prep Training classes are held at Intoximeters’ St. Louis Training Facility, and at select regional locations across the U.S.
NRC Operator and Calibration Tech Training
NRC Operator and Calibration Technician Training

The NRC Operator and Calibration Technician Training is focused on the needs of Breath Alcohol Technicians regulated by the Nuclear Regulatory Commission. The course covers the following:
- NRC Rules and Regulations Review
- Instrument Nomenclature & Components
- Sampling Methods
- Sampling Instruction
  - Mouth Alcohol Concerns
  - Operator Instructions for Subject
  NRC Operator and Calibration Technician Training classes are held at Intoximeters’ St. Louis Training Facility, and at select regional locations across the U.S.
  202 BAT/EBT Course (for AS IV @Work or ECIR II)
  PLEASE NOTE: This course covers only the Alco-Sensor IV @Work or the ECIR II instruments.
  
  This self study and one day in-classroom course certifies students as Breath Alcohol Technicians according to 49 CFR Part 40 regulations published by the U.S. Department of Transportation. This is Intoximeters’ standard method of training BATs and is appropriate for customers conducting DOT alcohol tests AND non-DOT testing.
  - Self-study (Online Learning Center) plus 1-Day Classroom
  - DOT Model Course – part 40 rules and regulations (online)
  - Intoximeters EBT instrument-specific training (classroom)
  - 7 mock tests with an Intoximeters Corporate Trainer (classroom)
  - Includes instruction on the Quality Assurance Plan (QAP) and Accuracy Checks
  - Passing a written exam is required for certification
  Upon successful completion of the required minimum seven tests and a written quiz, students will receive certification as Breath Alcohol Technicians. Please note that Calibration Technician Training has been incorporated into our Instructor class and is no longer offered as part of this basic BAT course.
  201 BAT/EBT Course (for RBT IV, RBT VXL, AS IV with Memory, or AMCC)
  PLEASE NOTE: This course is available to RBT IV, RBT VXL, AS IV with Memory or AMCC users.
  
  This self study and half day in-classroom course certifies students as Breath Alcohol Technicians according to 49 CFR Part 40 regulations published by the U.S. Department of Transportation. This is Intoximeters standard method of training BATs and is appropriate for customers conducting DOT alcohol tests AND non-DOT testing.
  - Self-study (Online Learning Center), plus 1/2 day classroom
  - DOT Model Course – part 40 rules and regulations (online)
  - Intoximeters EBT instrument-specific training (online)
  - Review of online EBT proficiency (classroom)
  - 7 mock tests with an Intoximeters Corporate Trainer (classroom)
  - Includes instruction on the Quality Assurance Plan (QAP) and Accuracy Checks
  Upon successful completion of the required minimum seven tests and a written quiz, students will receive certification as Breath Alcohol Technicians. Please note that Calibration Technician Training has been incorporated into our Instructor class and is no longer offered as part of the basic BAT course.
  Law Enforcement Instructor Preparation Training
  Law Enforcement Instructor courses are offered both at our St. Louis training facility and in select regional locations. Training includes:
  - Review of Common Challenges in Breath Alcohol Testing
    - Mouth Alcohol
    Please e-mail the Training Department for additional information.
    Law Enforcement Operator and Calibration Technician Training
    Operator/Calibration Technician courses are offered both at our St. Louis training facility and in select regional locations. Training will include:
    - Instrument Nomenclature & Components
    - Sampling Methods
    - Sampling Instruction
      - Mouth Alcohol Concerns
      - Operator Instructions for Subject
      Please e-mail the Training Department for additional information.
      301 BAT/EBT/Instructor (for RBT IV, RBT VXL, AS IV with Memory, or AMCC)
      Breath Alcohol Technician Instructor Training
      
      PLEASE NOTE: This course covers the RBT IV, the RBT VXL, the AS IV with Memory, or the AMCC instruments.
      
      This course includes 1 day self-study and 2 days of classroom instruction. The course has been shortened by 1 day for certain of our instruments since the introduction of our new on-line EBT Proficiency training program. Please note that certification on more than one instrument will incur additional charges and one additional day of training.
      - Self-study (Online Learning Center) plus 2 days classroom
      - DOT Model Course – part 40 rules and regulations (online)
      - Intoximeters EBT instrument-specific training (classroom)
      - 7 mock tests in a classroom setting with an Intoximeters Corporate Trainer
      - Includes instruction on the Quality Assurance Plan (QAP) and Accuracy Checks
      - Passing a written exam is required for certification
      - Calibration Technician training (classroom)
      - Instructor resource manual, training aids, and electronic files are provided
      - Advanced EBT and calibration theory plus testimony issues are discussed
      - Successful presentations of BAT and calibration technician training modules are required for certification
      Note: This course is an advanced class over and above DOT’s requirements for BAT instructors. Successful completion of the Instructor Course authorizes the individual as a Calibration Technician and to train Factory Authorized Calibration Technicians. Calibration Trainer Agreement expires every 12 months. Recertification requirements are at the discretion of Intoximeters.
      205 BAT/EBT Course (for RBT IV or RBT VXL only) Online
      This fully online course is available for the RBT IV/Alco-Sensor IV or the Alco-Sensor VXL instruments and qualifies for both DOT initial BAT training and DOT BAT refresher training. The course includes:
      - 49 CFR Part 40 Rules & Regulations via online Computer Based Training
      - Instrument Proficiency orientation via online Computer Based Training
      - 7 online mock tests via web cam
      - Quality Assurance Plan instruction
      - Accuracy Check instruction
      Once the student has successfully completed the online self-study components then a time will be scheduled for an Intoximeters Corporate Trainer to monitor the student performing 7 error-free mock alcohol collections to complete the Instrument Proficiency component of the BAT training. For this portion of the class you must have a working EBT instrument with printer and a valid (not expired) dry gas tank.
      
      Intoximeters will send check sheets and a sample logbook prior to the video conference. Student(s) must have an adjustable webcam and a high speed internet connection set up and working prior to the webcam session. In addition, it is required for the student to have a working EBT instrument with printer, a valid dry gas standard with regulator and a partner who can act as a subject for the mock tests. If 2 people are being trained, you will act as subjects for each other.
      302 BAT/EBT Instructor Course (for AS IV @Work and ECIR II)
      Breath Alcohol Technician Instructor Training
      
      PLEASE NOTE: This course covers only the Alco-Sensor IV @Work or the ECIR ii instruments.
      
      This BAT training class includes 1-day self study and three days in-classroom training and certifies students as Breath Alcohol Technicians (BATs) according to 49 CFR Part 40 regulations and as Breath Alcohol Technician (BAT) Instructors and Calibration Technician Instructors on a single Intoximeters EBT device. Please note that certification on more than one instrument will incur additional charges.
      - Self-study (Online Learning Center) plus 3 days classroom
      - DOT Model Course – part 40 rules and regulations (online)
      - Intoximeters EBT instrument-specific training (classroom)
      - 7 mock tests in a classroom setting with an Intoximeters Corporate Trainer
      - Includes instruction on the Quality Assurance Plan (QAP) and Accuracy Checks
      - Passing a written exam is required for certification
      - Calibration Technician training (classroom)
      - Instructor resource manual, training aids, and electronic files are provided
      - Advanced EBT and calibration theory plus testimony issues are discussed
      - Successful presentations of BAT and calibration technician training modules are required for certification
      Note: This course is an advanced class over and above DOT BAT training requirements for instructors. Successful completion of the Instructor Course authorizes the individual as a Calibration Technician and to train Factory Authorized Calibration Technicians. Calibration Trainer Agreement expires every 12 months. Recertification requirements are at the discretion of Intoximeters.
      305 BAT/EBT Instructor Course Online
      PLEASE NOTE: This course covers only the RBT IV or the RBT VXL instruments.
      
      This fully online train-the-trainer course is available for the RBT IV/Alco-Sensor IV or the Alco-Sensor VXL instruments and qualifies for both DOT initial BAT training and DOT BAT refresher training and includes BAT Instructor. A Mastery Test at the end must be passed to obtain a proof of completion.
      
      This course includes 1 day self-study and 2 consecutive days of classroom webcam instruction.
      
      Certification on more than one instrument will incur additional charges and one additional day of training.
      
      The course includes:
      - Self-study DOT Model Course – Part 40 Rules and Regulations (online)
      - Advanced 2 consecutive days BAT and BAT Instructor training
      - Day 1: Mocks,
        
        Day 2: BAT Instructor
        
        Instrument Proficiency orientation (online)
        
        Intoximeters EBT instrument-specific training (webcam)
        
        7 mock tests with an Intoximeters Corporate Trainer (webcam)
        
        Includes instruction on the Quality Assurance Plan (QAP) and Accuracy Checks
        
        Passing a written exam is required for certification
        
        Calibration Technician training
        
        Instructor resource manual, training aids, and electronic files are provided
        
        Advanced EBT training
        
        Successful presentations of BAT modules are required for certification
        
        Note: This course is an advanced class over and above DOT’s requirements for BAT instructors. Successful completion of the Instructor Course authorizes the individual as a Calibration Technician.
        
        What is the process? Once the student has successfully completed the online self-study components then a date and time will be confirmed for an Intoximeters Corporate Trainer to monitor the student performing 7 error-free mock alcohol tests to complete the Instrument Proficiency component of the BAT training. For this portion of the class you must have a working EBT instrument with printer and a valid (not expired) dry gas tank. After the completion of the 7 error-free mocks, the BAT Instructor training will commence on.
        TEST POP UP
        Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
        
        Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
        401 One-Day Urine Collector & Instructor Course
        Urine Drug Screen Collector and Instructor Training (1 day classroom)
        
        This course trains the student as a Collector and provides materials & guidance for use in training other collectors. A certificate will be issued to successful participants.
        
        Scroll down to view class schedule.
        
        This course includes an online self-study module to be completed prior to the classroom session. Topics include qualification requirements for collectors, trainers, and monitors, important definitions, collection site facility requirements, the new Custody and Control Form, steps in the collection process, and obstacles to completing a collection. A Mastery Test at the end must be passed to obtain a proof of completion.
        
        Classroom activities include detailed review of procedures before each mock test (5 in all). The course also includes discussions of instructor resources, monitoring student mock tests and available online materials. An Instructor manual and materials are provided for use in training collectors in your own company.
        105 UDS Collector Course (Urine Drug Screen training) Online
        The online UDS Collector course (course #105) is an interactive web course designed to train individuals to conduct urine drug screen collections under the 49 CFR Part 40 (DOT) regulations. The course includes:
        
        49 CFR Part 40 Procedures & Regulations via online self-study module
        
        5 online mock tests via webcamCourse topics include qualification requirements for collectors, trainers, and monitors, responsibilities of the collector as the gatekeeper of the process, important definitions, how to complete the Custody and Control Form, steps in the collection process, and a written examination. To participate in online Specimen Collector training, you will need the following materials:
        
        A computer with a high speed internet connection and an external adjustable webcam
        
        9 Custody & Control Forms (CCFs)
        
        7 DOT compliant split specimen collection kits
        
        A pitcher of warm water to simulate urine samples during the mock tests
        
        Another person to act as a donor (DOT requires that the mock tests be performed on a live subject) Questions?Contact the Training Department
        
        Maintenance School
        Intoximeters offers complete technical and maintenance training to our law enforcement customers at our headquarters in St. Louis. You must be a law enforcement officer working for the agency who owns the equipment to qualify for this training.
        
        Maintenance courses are offered once or twice per year at our St. Louis corporate offices.
        Online registration for Maintenance School classes is not available.
        PLEASE EMAIL THE TRAINING DEPARTMENT TO REGISTER, OR TO BE ADDED TO A WAITLIST FOR UPCOMING MAINTENANCE SCHOOL CLASSES.
        405 UDS Collector Instructor Online
        This fully online train-the-trainer course that trains and qualifies the student for both DOT initial Collector training and DOT Collector refresher training. This advanced UDS Collector Instructor course (course #405) is an interactive web course designed to train individuals to conduct urine drug screen collections under the 49 CFR Part 40 (DOT) regulations and certify them as a Collector Instructor to train others to be Collectors in their own company. A certificate will be issued to successful participants. A Mastery Test at the end must be passed to obtain a proof of completion.
        
        This course includes 1 day self-study and 1 day of classroom webcam instruction.
        
        The course includes:
        
        Self-study – 49 CFR Part 40 Procedures, Rules & Regulations (online)
        
        Advanced Collector and Collector Instructor training
        
        1 st portion: Mocks,
        
        2 nd portion: Collector Instructor
        
        Note: This course is an advanced class over and above DOT’s requirements for Urine Drug Screen Collector instructors. Successful completion of the Instructor Course authorizes the individual as a DOT UDS Collector and Instructor.
        
        What is the process?
        
        Register for the course
        
        Complete the 1 st component – online self-study component of the training
        
        Complete the 2 nd component – successfully complete Qualification training and 5 error-free mocks in the view of an Intoximeters Corporate Trainer as the Monitor
        
        Complete the 3 rd and final component – Collector Instructor Train-the-Trainer
        
        Once the student has successfully completed the online self-study components then a date and time will be confirmed for an Intoximeters Corporate Trainer to monitor the student performing 5 error-free mock collections to complete the Qualification component of the Collector training. For this portion of the class the student must have the required materials. After the completion of the 5 error-free mocks, the BAT Instructor training will commence on.
        
        Intoximeters will send all necessary training course materials including check sheets prior to the video conference. Student(s) must have an adjustable webcam and a high speed internet connection set up and working prior to the webcam session. If 2 people are being trained, they will act as subjects for each other.
        Law Enforcement Operator
        You must be a law enforcement officer working for the agency who owns the equipment to qualify for this training. This is a 3-hour course that includes basic operation, explanations of instrument displays and functions, and hands-on practice.
        
        The class covers automatic sampling, insufficient breath, manual sampling and mouth alcohol effects. Additional discussions of calibration theory and the procedures for accuracy checks and calibrations will also be presented.
        
        Law Enforcement Operator courses are offered both at our St. Louis training facility and in select regional locations. Scroll down to select your class.
        
        Please e-mail the Training Department for additional information.